ATF III (Yellow)
Automatic transmission oil with high performance reserves. For vehicles with tried and tested transmission technology. Excellent wear protection and favorable friction behavior. Even under the most difficult conditions and during large temperature fluctuations, it guarantees flawless hydraulic gear functioning. Provides extremely good lubrication properties and outstanding corrosion protection. Has good seal compatibility.
| article number: | 9521 |
| bundle: | 1 l Can plastic |
| palette content: | 570 |
| packing unit: | 6 STK |
| language: | D - GB - F - ARAB |
Intended use
For automatic transmissions, manu al shift transmission, steering systems, hydraulic and lateral drives both in the car and in the commercial vehicle sector. Use according to the aggregate or car and trans mission manufacturer's prescribed specifications.
Approvals
Allison C4 ; Caterpillar TO-2 ; Dexron III G ; Ford Mercon ; Voith H55.6335.XX (G 607) ; ZF TE-ML 04D ; ZF TE-ML 14A ; ZF TE-ML 17C
LIQUI MOLY recommends this product for vehicles with the following specifications: MAN 339 Typ V1 ; MAN 339 Typ Z1 ; MB 236.1
Brake Fluid DOT 4
This brake fluid was developed specially in order to extend the operating life of components in the hydraulic brake and clutch systems of motor vehicles. Enjoys high wet and dry boiling points, thus guaranteeing safe braking even after the absorption of some moisture over an extended period of use. Is also ideally suited to use in ABS brake systems.
| article number: | 3091 |
| bundle: | 250 ml Canister plastic |
| palette content: | 2016 |
| packing unit: | 24 STK |
| language: | GB |
Intended use
Ideally suited for use with all disk and drum brake systems, as well as motor vehicle clutch systems for which a synthetic brake fluid of this specification is prescribed.
Approvals
CUNA NC 956-01 ; FMVSS 116 DOT 4 ; SAE J 1704 ; SAE J 1703 ; ISO 4925 Class 3 ; ISO 4925 Class 4
Formula Super 15W-40
Mineral motor oil. Provides a stable lubricating film. Provides the ideal oil pressure under all operating conditions. High safety reserves under extreme loads.
| article number: | 9516 |
| bundle: | 1 l Canister plastic |
| palette content: | 600 |
| packing unit: | 12 STK |
| language: | D - GB - F - ARAB |
Intended use
All-year oil for petrol and diesel engines. Especially suitable for older vehicles - also with retrofit catalytic converter. Tested safe with catalytic converters and turbochargers.
Approvals
ACEA A2 ; ACEA B3 ; ACEA E3 ; Allison C4 ; API CF ; API CF-4 ; API SJ ; Caterpillar TO-2 ; MIL-L 2104 E ; MIL-L 46152 D ; Volvo VDS
LIQUI MOLY recommends this product for vehicles with the following specifications: MAN 271 ; MB 228.1 ; MTU Typ 1
Leichtlauf HC7 5W-40
First class, modern, low-friction engine oil for year-round use. The combination of unconventional hydrocracked-based base oils and the latest additive technology has provided an engine oil which is guaranteed to reduce oil and fuel consumption while providing for rapid oil penetration in the engine. In addition, Leichtlauf HC 7 SAE 5W-40 is best suitable for gas fuelled (CNG/LPG) passenger cars.
| article number: | 1347 |
| bundle: | 5 l Canister plastic |
| palette content: | 112 |
| packing unit: | 4 STK |
| language: | D - GB - I - E - P |
Intended use
Optimum for modern petrol and diesel engines with multi-valve technology and turbocharging with and without charge air cooling, and for use in gas fuelled (CNG/LPG) passenger cars. Especially suitable where there are long intervals between changes and heavy duty engine requirements.
Approvals
ACEA A3 ; ACEA B4 ; API CF ; API SN ; BMW Longlife-98 ; MB-Freigabe 229.3 ; Porsche A40 ; VW 502 00/505 00